Olympus E-1 - Page 119

119
Function/setting customizing
9
CUSTOM RESET SETTING
How to use reset settings
1
Hold down the (record mode) button and
(flash mode) button simultaneously.
● (reset cancel) is displayed on the control
panel.
● If you do not want to use the reset settings,
release the buttons.
2
While holding and , rotate the main dial or sub dial.
: Resets to the factory default settings.
: Resets to the settings registered in RESET 1.
: Resets to the settings registered in RESET 2.
: Resets to the settings registered in RESET 3.
: Resets to the settings registered in RESET 4.
● If no settings are registered with a RESET number, it will not be displayed.
button
button
Control panel Viewfinder
Sub dial
Main dial
Control panel Viewfinder
3
When the desired RESET number is displayed, release the buttons.
● The camera will be reset to the settings you selected.