OM SYSTEM LS-P5 - Adjusting Sound Level for Output to the Camera [Test Tone]

129
EN
4
Menu
Using a test tone to match output volume to the optimal camera recording level before
beginning recording helps prevent crackling and distortion.
1
Connect the camera audio
input jack to the earphone
jack (
) on the voice recorder
(☞ P.63).
To earphone
jack
To camera
audio input jack
2
Press the MENU/SCENE
button while the voice recorder
is in stop mode.
3
Press the + or − button to
select the [Rec Menu] tab.
4
Press the `OK button to
move the cursor into the list of
setting items.
5
Press the + or − button to
select [Test Tone].
6
Press the `OK button.
7
Press the `OK button again to
sound a test tone.
Adjusting Sound Level for Output to the
Camera [Test Tone]