88
EN
4
Menu
Recording menu [Rec Menu]
Selecting the automatic
recording setting [Rec Scene]
The voice recorder has preregistered
templates of optimum settings tailored to
various recording applications such as
lectures and dictation. When selecting one
of these templates you can enter several
settings recommended for your recording
application all in a single operation.
See “Selecting the automatic recording
setting [Rec Scene]” (☞ P.47) for the
procedure.
Disabling output during
recording [Rec Monitor]
Configure the recorder to disable output
to external speakers and other connected
devices during recording.
[On]:
Sound is output to connected devices
during recording.
[Off]:
Sound is not output to connected
devices during recording.
NOTE
• Sound will not be output to
Bluetooth
®
earphones if a 24-bit
[PCM] or [FLAC] option is selected
for [Rec Menu] > [Rec Mode].
Choose a non-24-bit option
(☞ P. 85).
Recording Using External
Mics or Other Input Devices
Connected to the Recorder
[External Input]
Record sound from an external
microphone or audio device connected
via the voice recorder’s microphone/line
jack ( ).
See “Recording Using External Mics or
Other Input Devices Connected to the
Recorder [External Input]” (☞ P.53) for
the procedure.
Starting recording at a set
time [Timer Rec]
Start and end recording at specified times.
See “Starting Recording at a Set
Time [Timer Rec]” (☞P.118)forthe
procedure.
To Next Page
Loading...
Need help?
General