OM SYSTEM LS-P5 - Lcd;Sound Menu [Lcd;Sound Menu]; Setting the Backlight [Backlight]; Adjusting the Contrast [Contrast]; Setting the LED Indicator Light [LED]

98
EN
4
Menu
LCD/Sound menu [LCD/Sound Menu]
Setting the backlight
[Backlight]
The display backlights are switched on
for a preset amount of time when a button
operation is performed.
[5 sec.], [10 sec.], [30 sec.], [1 min.]:
Set the amount of time that the
backlight stays lit.
[Off]:
Disables the backlight.
Adjusting the contrast
[Contrast]
You can adjust the contrast of the display
to 12 different levels.
• The setting can be adjusted to between
[01] to [12].
Setting the LED indicator light
[LED]
Disable the LED (recording/PEAK)
indicator light.
[On]:
LED indicator light is switched on.
[Off]:
LED indicator light stays off.
TIP
• Even if you set the [LED] setting
to [Off], the LED indicator light will
flash while files are being transferred
between the voice recorder and a
computer.
Turning beeping sound on/off
[Beep]
The voice recorder makes beeping sounds
when buttons are pressed, or to warn in
case of operation errors. You can select
whether the voice recorder makes these
beeping sounds.
[On]:
Enables beeping sounds.
[Off]:
Disables beeping sounds.
Changing the display language
[Language]
You can select the language used in the
voice recorder’s displays.
• [Čeština], [Dansk], [Deutsch],
[English], [Español], [Français],
[Italiano], [Nederlands], [Polski],
[Русский], [Svenska], [繁體中⽂].