To Next Page

To Previous Page

Recording

Sound can be monitored during recording using either earphones or other audio

equipment connected via the earphone jack ( ) or Bluetooth

devices connected via

Bluetooth

Using Earphones Connected to the Earphone Jack to Monitor Sound

During Recording

You can monitor the recording as you are making it by listening on the earphones

plugged into the voice recorder’s earphone jack ( ). Use the + or − button to adjust the

recording monitor volume.

• The earphones are optional.

• Speakers and other devices that can be connected via the earphone jack can be used

instead of earphones.

NOTE

• Confirm that [On] is selected for [Rec

Monitor] (☞ P. 88). Sound will not

be output to earphones when [Off]

is selected.

Connect the earphones to the

voice recorder’s earphone

jack ( ).

To earphone

jack

Adjust the volume using the +

or − button.

• Adjust volume while listening to the

sound currently being recorded.

• Changing the volume will not affect

the recording level.

NOTE

• To avoid unpleasantly loud sound,

set the volume to [00] before

plugging in the earphone.

• To prevent feedback, do not place

the earphone near the microphone

while recording.

Monitoring while recording

OM SYSTEM LS-P5 User Manual

Questions and Answers: