OM SYSTEM LS-P5 - Setting a Skip Space [Skip Space]

97
EN
4
Menu
Playback menu [Play Menu]
Setting a skip space
[Skip Space]
The [Skip Space] function lets you skip
a preset amount forward (forward skip)
or backward (reverse skip) in a file during
playback. It is handy for quickly moving the
playback position, or for repeated playback
of a short segment.
1
Press the + or − button to
select [Forward Skip] or
[Reverse Skip].
[Forward Skip]:
Starts playback after moving the
playback position forward by the set
amount.
[Reverse Skip]:
Starts playback after moving the
playback position backward by the
set amount.
2
Press the + or − button to
select a setting.
When [Forward Skip] was selected:
[File Skip], [10 sec. Skip], [30 sec.
Skip], [1 min. Skip], [5 min. Skip],
[10 min. Skip]
When [Reverse Skip] was selected:
[File Skip], [1 sec. Skip] to [3 sec.
Skip], [5 sec. Skip], [10 sec. Skip],
[30 sec. Skip], [1 min. Skip],
[5 min. Skip]
NOTE
• Forward/reverse skip operations
over a skip space that contains an
index mark/temp mark or the starting
position of a file will stop at that mark
or at the start position.
Forward/reverse skip playback
1
Press the `OK button to start
playback.
2
Press the 9 or 0 button
during playback.
• Playback starts after skipping
forward or backward by the set
amount.