OM SYSTEM LS-P5 - Selecting Microphone Directivity [Zoom MIC]

86
EN
4
Menu
Recording menu [Rec Menu]
TIP
• Sound quality increases as the
recording rate value increases.
• Setting a higher recording rate
increases file size. Check that you
have enough remaining memory
before recording.
• To record conferences and
presentations clearly, it is
recommended to set [Rec Mode] to
other than [mono].
NOTE
• When [Rec Mode] is set to stereo,
recording with a connected mono
microphone records on the left
channel only.
• Adjusting [Rec Mode] settings
selects [Off] for [Rec Scene] and [Fn
Rec] > [Over Dubbing].
• Selecting [PCM] or [FLAC] selects
[Off] for [Voice Detect] > [While
Recording] and [Fn Rec] > [Pre-
Recording].
• Seconds of the remaining recordable
time is not displayed when [FLAC]
is set.
Selecting microphone
directivity [Zoom Mic]
The voice recorder’s built-in stereo
microphone provides directivity ranging
from broad-coverage stereo recording to
highly directional recording.
1
Press the + or − button to
adjust the built-in stereo
microphone’s directivity.
• The setting can be adjusted to
between [00] and [20].
• The + button increases directivity.
• The − button enables recordings
with broader-coverage stereo.
• Reducing directivity and broadening
the sound pickup range gives
recordings more of a stereo effect.
00
07
14
20
Broad sound
pickup range
High
directivity
Low
directivity
Narrow sound
pickup range