14
EN
1
Getting started
Setup
6
Press the `OK button to
finalize the setting.
• The recorder will display a
[Charging] dialog and start charging
the batteries. The LED indicator light
will turn on.
• Charging has finished when the
battery indicator changes to [ ].
Battery indicator
Charging time: About 3 hours*
* Approximate time needed to fully
charge completely flat batteries at
room temperature. Battery charging
time will depend on the amount of
remaining power and the state of
the batteries.
7
Disconnect the USB cable
from the voice recorder and
computer.
• You will be prompted to set the time/
date.
To Next Page
Loading...