140
EN
5
Bluetooth
®
function
Connecting/disconnecting a Bluetooth
®
device
11
Press the `OK button.
• [Connecting!] appears in the
display, and the connecting process
starts. [Connection Completed]
appears when the process has
finished.
12
Press the STOP ( 4) button to
exit the menu screen.
NOTE
• Recording, playback, and other
operations are not possible during
the pairing process.
• Only one Bluetooth
®
device can
be connected by performing pairing
setting once. Multiple devices cannot
be paired simultaneously. Configure
the connection settings separately
for each device.
• The recorder can connect with only
one audio device at a time. It can
connect with both an audio device
and a smartphone at the same time
(☞ P. 136).
• If communication become unstable
after the connecting is completed,
the voice recorder may enter the
connection wait state.
• If the Bluetooth
®
connection wait
state is entered while playback is in
progress, the playback operation is
interrupted. Check the status of the
voice recorder while playback is in
progress.
• If Bluetooth
®
is disconnected while
playback is in progress, the playback
operation stops.
To Next Page
Loading...