153
EN
7
Other information
Troubleshooting
Problem Possible cause Solution
The computer is unable
to recognize the voice
recorder.
[AC Adapter] has been selected
for [USB Connection].
Select [PC] for [USB Connection]
(☞ P.131).
Playback speed is fast
(or slow).
Playback speed function is set
to anything other than [x1.0
Play].
Set the playback speed function setting
to [x1.0 Play] (☞ P.66).
Operation is different
from usual.
The settings of functions have
been changed.
Try [Reset settings]. Various functions
will be restored to their initial (factory
default) settings. Time clock settings and
recorded files are retained (☞ P.102).
Unable to connect with
a Bluetooth
®
device.
The Bluetooth
®
device to
be connected is not in a
connectable state.
Make the Bluetooth
®
device
connectable and then try configuring the
settings again (☞ P.137).
The distance between the
Bluetooth
®
device and voice
recorder is too far or there is an
obstruction between them.
Place the Bluetooth
®
device within
1 m of the voice recorder and then
try configuring the settings again
(☞ P.137).
The pairing information has
been deleted.
Perform pairing setting again
(☞ P.137).
Recording cannot
be monitored from a
Bluetooth
®
device.
A 24-bit option is selected for
[Rec Mode].
Select an option with a different bit depth
(☞P.85).
To Next Page
Loading...
Need help?
General