6-10
M7F Digital Display
H Specifications
Item Specifications
Rated voltage Variable voltage between 12 and 24 V DC
Current consumption (per display) 14 mm: 200 mA max. (at 12 V DC)
100 mA max. (at 24 V DC)
25 mm: 300 mA max. (at 12 V DC)
200 mA max. (at 24 V DC)
Input level Positive logic H: 4 V to power supply voltage
L: 0 to 1.5 V
Operating ambient temperature –10 to 55°C (with no icing)
Operating ambient humidity 35 to 85% (with no condensation)
Storage temperature –25 to 70°C (with no icing)
Insulation resistance 100 MΩ min. (at 500 V DC) between each terminal and mounting
panel
Dielectric strength 1,000 V AC, 50/60 Hz for 1 min between each terminal and mounting
panel
Noise immunity Power terminal: ±500 V (normal mode)
Input terminals: ±1,500 V (common mode)
I/O cable: ±800 V (when the specified cable is used)
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance 300 m/s
2
Degree of protection IEC IP40
Compatible connector OMRON XG5M-2035-N/XG5S-1001 or 2012
Display accuracy 5 r/min max.
H Terminal Arrangement
Case
mark
Terminal
symbol
Name Function
A
B
C
D
Data input
The numeral or symbol corresponding to the binary code
signal will be displayed.
A (2
0
)
B (2
1
)
C (2
2
)
D (2
3
)
S0
S1
S2
S3
S4
Control input
Designates the digit to be displayed. Each digit will
maintain the previous value when this signal is input.
S0 (10
0
)
S1 (10
1
)
S2 (10
2
)
S3 (10
3
)
S4 (10
4
)
+V Power supply Power supply and output terminal
0V Power supply Power supply 0-V output terminal (GND)
Specifications Chapter 6
To Next Page
Loading...
