Omron CP - PROGRAMMING MANUAL 05-2007 - Page 801

768
Step Instructions Section 3-21
W0.03
W0.03
0.01 (SW1, SW2)
0.02 (SW3)
W0.00
W0.02
W0.00
W0.01
W0.01
0.04 (SW5, SW6)
W0.04
W0.02
0.03 (SW4)
W0.03
W0.03
W0.04
0.05 (SW7)
W100.00
Process A
started.
Process C
started.
Programming for process A
Process A
reset.
Process B
started.
Used to
turn off
process D.
Process E
started.
Programming for process C
Process C
reset.
Process D
started.
Programming for process D
Programming for process E
Process E
reset.
Programming for process B