xv
About this Manual:
This manual describes installation and operation of the CP-series Programmable Controllers (PLCs)
and includes the sections described below. The CP Series provides advanced package-type PLCs
based on OMRON’s advanced control technologies and vast experience in automated control.
Please read this manual carefully and be sure you understand the information provided before
attempting to install or operate a CP-series PLC. Be sure to read the precautions provided in the fol-
lowing section.
Definition of the CP Series
The CP Series is centered around the CP1H CPU Units and is designed with the same basic architec-
ture as the CS and CJ Series. The Special I/O Units and CPU Bus Units of the CJ Series can thus be
used. CJ-series Basic I/O Units, however, cannot be used. Always use CP-series Expansion Units and
CP-series Expansion I/O Units when expanding I/O capacity.
I/O words are allocated in the same way as the CPM1A/CPM2A PLCs, i.e., using fixed areas for inputs
and outputs.
CS/CJ/CP Series
CS1H-CPU@@H
CS1G-CPU@@H
CS1-H CPU Units
CS-series Power Supply Units
Note: Products specifically for the CS1D
Series are required to use CS1D
CPU Units.
CS-series Basic I/O Units
CS-series CPU Bus Units
CS-series Special I/O Units
CS1 CPU Units
CS Series
CS1H-CPU@@ (-V1)
CS1G-CPU@@ (-V1)
CJ1H-CPU@@H
CJ1G-CPU@@H
CJ1G -CPU@@P
(Loop CPU Unit)
CJ1-H CPU Units
CJ1 CPU Unit
CJ Series
CJ1G-CPU@@
CJ1M CPU Unit
CJ1M-CPU@@
CS1D CPU Units
CS1D CPU Units for
Duplex-CPU System
CS1D-CPU
@@ H
CS1D CPU Units for
Single-CPU System
CS1D-CPU S
CS1D Process CPU Units
CS1D-CPU
@@ P
CP1H-X@@@@-@
CP1H-XA@@@@-@
CP1H-Y@@@@-@
CP1H CPU Units
CJ-series CPU Bus Units
CJ-series Special I/O Units
CP Series
CP-series Expansion Units
CP-series Expansion I/O Units
@@
CJ-series Basic I/O Units
CJ-series Special I/O Units
CJ-series CPU Bus Units
CJ-series Power Supply Units