4-3 Manually Setting Data Links
4-3-9 Creating, Reading, and Writing CSV Files (Saving)
Tag name Description Set value
<node>
(Node No.)
The node No. for the link. 1 to 62. An error will be generated
if an out-of-range value is set
when a file is loaded.
<cpu>
(PLC type)
The PLC type for the node. CS1G, CS1G-H, CS1H, CS1H-H,
CJ1G, CJ1G-H, CJ1H-H, CJ1M,
CS1D-H, CS1D-S, CV500,
CV1000, CV2000, CVM1,
CVM1-V2, CQM1H, C200HE,
C200HE-Z, C200HG, C200HG-Z,
C200HX, C200HX-Z, NSB, CS/CJ
<cpu-type>
(CPU model)
The CPU model for the node. CS1G: CPU42, CPU43, CPU44,
CPU45
CS1G-H: CPU42, CPU43,
CPU44, CPU45
CS1H: CPU63, CPU64, CPU65,
CPU66, CPU67
CS1H-H: CPU63, CPU64, CPU65,
CPU66, CPU67
CS1G/CJ1G: CPU44, CPU45
CJ1G-H: CPU42, CPU43, CPU44,
CPU45
CJ1H-H: CPU65, CPU66, CPU67
CJ1M: Not specified.
CS1D-H: CPU65, CPU67
CS1D-S: CPU42, CPU44, CPU65,
CPU67
CV500: Not specified.
CV1000: Not specified.
CV2000: Not specified.
CVM1: CPU01, CPU11, CPU21
CVM1-V2: Not specified.
CQM1H: CPU51, CPU61
C200HE: Not specified.
C200HE-Z: Not specified.
C200HG: Not specified.
C200HG-Z: Not specified.
C200HX: Not specified.
C200HX-Z: Not specified.
C200HX-Z: CPU65, CPU85
NSB: Not specified.
CS/CJ: Not specified.
<status-start-
type>
(Status start
address, memory
area)
The status start address and
the memory area.
Any of the following memory areas
can be specified, regardless of the
PLC type.
Initial value: Default (See note.)
CIO: Blank, CIO, or IR
DM: D or DM
LR: L or LR
EM: E + Bank No.
HR: H or HR
AR: A or AR
T/C: T/C
Note: Data link status is stored in
the default area. For details, refer
to the Unit's operation manual.
(2) <node-
param>
<status-start-ch>
(Status area start
address)
The start address for the
status area.
The range differs depending on
the status area type.
4-29
To Next Page
Loading...
