6-1 DeviceNet Setting Procedures
6-1-3 Saving the Parameters for the Entire Existing Network
6-1-3 Saving the Parameters for the Entire Existing Network
The parameters for all of the devices on the network can be saved for use in
maintenance.
2-2 Connecting Online to the Relay PLC
2-9 File Operations
Upload from the network.
Connect to the network (online).
Save the settings as a CX-Integrator
project file (.cin).
Start the CX-Integrator.
2-7 Uploading, Downloading, and Comparing Network
Parameters
6-3
To Next Page
Loading...
