9-1 Controller Link Network Diagnostic Tool
9-1-2 Diagnosing Network Status
Node Icons
Node address
Name that is specified in the
node file
Node icon
Indicates terminating
resistance.
Indicates participation
in data links.
Displayed Icons
The icon that is displayed depends on the model of the PLC, as shown below.
Node icon Model
CS Series
CJ Series
CVM1/CV Series
C200HX/HG/HE
CQM1H Series
Computers (or NS-series Programmable
Terminals, Open Network Controllers, etc.)
Note
A computer will be displayed when a Controller Link node is a Controller Link Support
Board.
will be displayed when the PLC model cannot be determined (e.g., for NS-series
Programmable Terminals, Open Network Controllers, etc.)
9-9
To Next Page
Loading...
