Omron E5GN - Page 34

CHAPTER 3 BASIC OPERATION
E5GN
3–6
3.3 Selecting _C/_F
Ă• Select either _C" or _F" as the temperature unit.
Ă• Set the temperature unit in the temperature unit" parameter of initial
setting level". Default is  : _C".
Select _C"
(1) Press the key for at least three seconds to move from the operaĆ
tion level" to the initial setting level".
(2) Select the temperature unit" parameter by pressing the key.
Press the or keys to select either _C" or _F".
: _C : _F
(3) To return to the operation level" press the key for at least one
second.
Selecting _C/_F
JTemperature unit
Operation Procedure
Operation level
Input type
Initial setting level
Temperature unit