About Edit
You can edit Network drive’s name e.t.c.
Setting Procedure of Edit is the following.
1 Select Network drive that you want to edit.
2 Click Edit.
3 Enter Share name, Shared folder, User name and Password.
Item
Set value
[Factory default]
Description
Share name
• S
• T
• U
• V
• W
• X
• Y
• Z
This is the name to be recognized by the Controller as a net-
work drive. Only 1 unit can be connected.
For FH series/FHV series, a drive letter such as E:, F:, G:, or
H: is displayed.
(Example)
For network Drive S, the following drive names are used to
access communication commands, macro programs, and so
on.
• FH series/FHV series:
S:/
Shared folder
-
Specify the shared folder name.
Create a folder in advance on a computer that has a DNS re-
solved name on the network, and specify this as the shared
folder name. For example, if the host name (computer name)
is VISION and the shared name is COMMON, specify a
name such as \\VISION\COMMON.
4 Setting the Controller
4 - 53
FH/FHV Series Vision System User’s Manual (Z365-E1)
4-13 Setting Network Drive [Network Drive Setting]
4
To Next Page
Loading...
Need help?
General
