4-1
Selecting Language [Startup Set-
tings]
You can set the language to use for the characters displayed on the displays. Information about the
application software will be displayed in the selected language.
Additional Information
• When a Controller with default settings is started, the Language setting dialog box is auto-
matically displayed.
• The Controller default setting is for Japanese-language displays. If the language setting is
changed to a non-Japanese language, the system automatically restarts.
1 In the Main Window, select System settings - Startup - Startup setting - Language Setting
from the Tool menu.
The Language setting dialog box is displayed.
2
Click the ▼ button to select the language.
3 Click the Apply button.
4 Return to the Main Window and click the Data save button. Then, restart the Controller. The
Controller will start up with the selected language.
Additional Information
The Language setting dialog box is also displayed when restarting after executing System
initialization.
4 Setting the Controller
4 - 2
FH/FHV Series Vision System User’s Manual (Z365-E1)
To Next Page
Loading...
