Omron FHV7 series User Manual

Saving to an External Storage Device
This section explains the procedures for saving settings data to the External Storage Device.
1 Set Save to, Sensor controller’s project name and Note.
Creates the sensor controller project as the file in save destination. Saves the selected setting
data to the folder of the sensor controller project.
2 Click Execute button.
3
While saving the sensor controller’s project, Processing dialog box is displayed.
Precautions for Correct Use
While saving the sensor controller's project, do not turn off the power supply of the Sensor Con-
troller, or disconnect the external storage device. Doing so could corrupt the external storage
device, or corrupt the sensor controller project data.
4 After saving the sensor controller’s project, Confirm dialog box is displayed.
After successfully saving in saving the Sensor Controller project, folder with project name
specified when setting the save destination to the external storage device. Saves the selected
setting data to the folder of the sensor controller project.
9 Saving/Loading Data
9 - 21
FH/FHV Series Vision System User’s Manual (Z365-E1)
9-7 Backing up Sensor Controller Setting Data [Configuration Copy]
9
9-7-2 Backing up Sensor Controller Settings

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English