Omron FHV7 series User Manual

3
In the Version select the version of the measurement application of the sensor controller to be
controlled remotely.
4 Click the Run button.
Note that the Sensor Controller must be placed in a measurement capable state.
Precautions for Correct Use
Do not connect or disconnect the Remote Operation Tool during a measurement or the system
running.
5 Click Browse.
A Network reference list will be displayed.
When you run the simulation software of the sensor controller on the remote operation side
PC, the simulation software information may be displayed in the Network reference list.
6 Select your target Sensor Controller in the list and click Set Network....
10 Advanced Usage
10 - 8
FH/FHV Series Vision System User’s Manual (Z365-E1)

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English