Item Description
User name Enter a user name of 1 to 20 single-byte alphanumeric characters. The
names are case sensitive.
User group ID Select the user group (UG0 to UG7) to which the user being added will be-
long.
If you select UG0, the user can use all functions.
Refer to 10-3-3 Setting User Group Operation Restrictions on page 10 - 34.
Password Enter the login password for the user being added.
The password for the new user must have one or more characters.
The password for a transferred user may also be 0 characters.
Confirm password Enter the login password again.
5 Click OK.
The user account is added and displayed in the user account list.
Precautions for Correct Use
The number of user accounts is not limited and can be added as long as there is sufficient free
memory. If the amount of used memory increases and the amount of free memory becomes in-
sufficient, you can not add accounts. Please check the memory consumption (physical memo-
ry(the remaining capacity) or available data memory) when you add user accounts.
For details, refer to 3-4 Checking the Memory Consumption and Percentage of Memory Used
on page 3 - 28,3-3 Checking System Information [System Information] on page 3 - 24.
Editing an Account
Use the following procedure to change the user group or password for the user account.
1 In the Main Window, select Security settings from the Tool menu.
The Security settings dialog box is displayed.
2
Click Account list in the Item Tab Area.
3
Click the user to change the user group or password for.
10 Advanced Usage
10 - 30
FH/FHV Series Vision System User’s Manual (Z365-E1)
To Next Page
Loading...
Need help?
General
