Omron NJ501-1500

2-233
2 Instruction Descriptions
NJ-series Instructions Reference Manual (W502)
Data Type Conversion Instructions
2
**_TO_*** (Integer-to-Integer Conversion Group)
The following table shows the valid ranges for In and Out according to their data types.
Data type
of In
Data type
of Out
Valid range for In and Out
USINT
UINT
0 to 255UDINT
ULINT
SINT 0 to 127
INT
0 to 255DINT
LINT
UINT
USINT 0 to 255
UDINT
0 to 65535
ULINT
SINT 0 to 127
INT 0 to 32767
DINT
0 to 65535
LINT
UDINT
USINT 0 to 255
UINT 0 to 65535
ULINT 0 to 4294967295
SINT 0 to 127
INT 0 to 32767
DINT 0 to 2147483647
LINT 0 to 4294967295
ULINT
USINT 0 to 255
UINT 0 to 65535
UDINT 0 to 4294967295
SINT 0 to 127
INT 0 to 32767
DINT 0 to 2147483647
LINT 0 to 9223372036854775807
SINT
USINT
0 to 127
UINT
UDINT
ULINT
INT
−128 to 127DINT
LINT
INT
USINT 0 to 255
UINT
0 to 32767UDINT
ULINT
SINT −128 to 127
DINT
−32768 to 32767
LINT
DINT
USINT 0 to 255
UINT 0 to 65535
UDINT
0 to 2147483647
ULINT
SINT −128 to 127
INT −32768 to 32767
LINT −2147483648 to 2147483647