Omron NJ501-1500

27
Related Manuals
NJ-series Instructions Reference Manual (W502)
Related Manuals
The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NJ-series CPU Unit
Hardware User’s Manual
W500 NJ501-@@@@ Learning the basic specifi-
cations of the NJ-series
CPU Units, including intro-
ductory information,
designing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
An introduction to the entire NJ-series system is
provided along with the following information on
a Controller built with an NJ501 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the NJ-series
CPU Unit Software User’s Manual (Cat. No.
W501).
NJ-series CPU Unit Soft-
ware User’s Manual
W501 NJ501-@@@@ Learning how to program
and set up an NJ-series
CPU Unit. Mainly software
information is provided.
The following information is provided on a Con-
troller built with an NJ501 CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 lan-
guage specifications
Use this manual together with the NJ-series
CPU Unit Hardware User’s Manual (Cat. No.
W500).
NJ-series CPU Unit
Motion Control User’s
Manual
W507 NJ501-@@@@ Learning about motion
control settings and pro-
gramming concepts.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described. Use this manual together with the
NJ-series CPU Unit Hardware User’s Manual
(Cat. No. W500) and NJ-series CPU Unit Soft-
ware User’s Manual (Cat. No. W501).
NJ-series Instructions
Reference Manual
W502 NJ501-@@@@ Learning about the specifi-
cations of the instruction
set that is provided by
OMRON.
The instructions in the instruction set (IEC
61131-3 specifications) are described. When
programming, use this manual together with the
NJ-series CPU Unit Hardware User’s Manual
(Cat. No. W500) and NJ-series CPU Unit Soft-
ware User’s Manual (Cat. No. W501).
NJ-series Motion Control
Instructions Reference
Manual
W508 NJ501-@@@@ Learning about the specifi-
cations of the motion con-
trol instructions that are
provided by OMRON.
The motion control instructions are described.
When programming, use this manual together
with the NJ-series CPU Unit Hardware User’s
Manual (Cat. No. W500), NJ-series CPU Unit
Software User’s Manual (Cat. No. W501) and
NJ-series CPU Unit Motion Control User’s Man-
ual (Cat. No. W507).
CJ-series Special Unit
Manuals for NJ-series
CPU Unit
W490
W498
W499
W491
Z317
W492
W494
W497
CJ1W-@@@@ Learning how to use CJ-
series Units with an NJ-
series CPU Unit.
The methods and precautions for using CJ-
series Units with an NJ501 CPU Unit are
described, including access methods and pro-
gramming interfaces. Manuals are available for
the following Units.
Analog I/O Units, Insulated-type Analog I/O
Units, Temperature Control Units, ID Sensor
Units, High-speed Counter Units, Serial Com-
munications Units, and DeviceNet Units.
Use these manuals together with the NJ-series
CPU Unit Hardware User’s Manual (Cat. No.
W500) and NJ-series CPU Unit Software User’s
Manual (Cat. No. W501).