Omron NJ501-1500

2 Instruction Descriptions
2-654
NJ-series Instructions Reference Manual (W502)
Determine if execution of the ExecPMCR instruction is completed.
Processing completed
Execution condition
Processing
Port settings
Send data
Receive data
Present value
Accept trigger.
Execute ExecPMCR instruction.
Set communications parameters.
Inline ST
// Serial Communications Unit with unit number 2
// Port number 1
Variable Data type Initial value
AT
specification
Comment
LD
OperatingEnd
Trigger
Operating
InPort
SendData
RecvData
TmpData
RS_instance
ExecPMCR_instance
False
False
False
(UnitNo:=_CBU_No00, PhysicPortNo:=0)
[5(16#0)]
[4(16#0)]
0
%D200
BOOL
BOOL
BOOL
_sPORT
ARRAY[0..4] OF WORD
ARRAY[0..3] OF WORD
DINT
RS
ExecPMCR
ExecPMCR_instance.Done
ExecPMCR_instance.Error
ExecPMCR_instance.Busy
OperatingEnd
Operating
OperatingEnd
Trigger
_Port_isAvailable SCU_P1_PmrExecSta
RS
Set Q1
Reset1
RS_instance
Operating
InPort
UINT#610
SendData[0]
RecvData[0]
1 InPort.UnitNo :=_CBU_No02;
2 InPort.PhysicPortNo:=USINT#1;
3 SendData[0] :=WORD#16#0005;
4 SendData[1] :=WORD#16#0003;
5 SendData[2] :=WORD#16#C000;
6 SendData[3] :=WORD#16#0000;
7 SendData[4] :=WORD#16#0001;
8 RecvData[0] :=WORD#16#0004;
Operating
ExecPMCR
Execute Done
Port Busy
SeqNo Error
SrcDat ErrorID
DstDat
ErrorIDEx
ExecPMCR_instance
SCU_P1_PmrSeqEndSta
SCU_P1_PmrSeqAbtSta
SCU_P1_PmrExecSta
_Port_isAvailable
BOOL
BOOL
BOOL
BOOL
Variable Data type Comment
Sequence End Completion Flag
Sequence Abort Completion Flag
Protocol Macro Execution Flag
Network Communications Instruction Enabled Flag
Internal
Variables
External
Variables
Retain