Section 2 NS Series Functions 2-8 Common Functional Object Functions
2-96
NS Series Programming Manual
Flicker Settings
The flicker speed and area can be set separately for each flicker number.
Click the Flicker setting Button on the Flicker Tab Page to make these flicker settings.
1
2
5
3
4
No. Setting Details
1 Flicker No. Set the flicker number between 1 and 10.
2 Flicker speed Sets the flicker speed.
3 Flicker range Select one of the following 5 of flicker ranges.
Flicker color
settings
Sets the flicker method and color for flicker.
Show dis-
play color
and in-
verse color
alternately
Repeats alternate display of the display color and its inverse color.
Show and
hide alter-
nately
Repeatedly alternates between showing and hiding display of the whole object or the
label string.
4
Specify
display
color
Repeats alternate display of the current display color and the specified color.
The color for flicker can be specified as Text Color, Background Color, or Line Color.
Select the checkbox under
Specified Color for what color is to be changed (text, back-
ground, or line color) and specify the color.
5 Control flag When set to Enabled: The object flickers.
When set to Disabled: The object does not flicker.
When set to Indirect: Switches between enabled and disabled when the specified
address turns ON and OFF. Only bits can be set for indirect.
To Next Page
Loading...
Need help?
General
