Omron NS10-TV Series

Section 2 NS Series Functions 2-11 Multifunction Objects
2-195
NS Series Programming Manual
Data Block Control
This function operates on data blocks. When a button is pressed, CSV file data is transferred to the
specified addresses in the PLC or the data from specified addresses in the PLC is transferred to the
specified record in the CSV file.
Click the Object Control Button and select Data Block Control from the list that is displayed.
1
2
No. Item Details
1 Control Content Select one of the following control operations.
• Read data from CSV file to PLC Data Block
• Write data from PLC Data Block to CSV file
• Read data from CSV file to NS
• Write data from NS to CSV file
• Read data from NS to PLC Data Block
• Write data from PLC Data Block to NS
• Read record label
• Delete record
The setting items depend on the selected control operation.
2 Data Block No.
Specifies the data block group number (1 to 100) for the control operation. The
group number can be set indirectly through a communications address by se-
lecting the Indirect Option.
N
N
N
o
o
o
t
t
t
e
e
e
♦
Multifunction Object processing will be canceled in the following cases.
• If the specified data block group does not exist.
• If the specified record does not exist.