Section 2 NS Series Functions 2-11 Multifunction Objects
2-228
NS Series Programming Manual
Same Value
1
2
3
4
No. Item Details
1
Display
Address (1)
Sets the communications address for comparison with the
Set Value.
2 Storage Format
Select the storage format for the numeric value stored at the communications
address from the following.
• INT (signed, 1 word)
• UINT (unsigned, 1 word)
• DINT (signed, 2 words)
• UDINT (unsigned, 2 words)
• REAL (real number)
• BCD2 (unsigned, 1 words)
• BCD2 (unsigned, 2 words)
• BCD1 (signed (leftmost digit: F), 1 words)
• BCD1 (signed (leftmost digit: F), 2 words)
• BCD2 (signed (leftmost bit: 1), 1 words)
• BCD2 (signed (leftmost bit: 1), 2 words)
3
Direct Refer-
ence
Sets the value (set value) for comparison with the display address.
4
Indirect Refer-
ence
Sets a communications address for comparison with the display address.
To Next Page
Loading...
