Section 2 NS Series Functions 2-20 Special Functions
2-437
NS Series Programming Manual
Checking the Log
The operation log can be checked on the Operation Log (Sort by Occurrence) Screen or Operation Log
(Sort by Frequency) Screen of the System Menu.
The following methods can be used to display the Operation Log (Sort by Occurrence) Screen or Op-
eration Log (Sort by Frequency) Screen during operation.
• Switch screens in the System Menu.
• Execute a Multifunction Object for which displaying the operation log is set (display from user
screen).
Switching Screens in the System Menu
1. Select Operation Log (Sort by Occurrence) or Operation Log (Sort by Frequency) from the Special
Screen Tab Page of the System Menu.
2. The operation log can be checked.
Executing a Multifunction Object Set to Display the Operation Log
1. Create a Multifunction Object on a user screen.
2. Select Switch Screen – Display System Menu – Operation Log (Sort by Occurr.) or Operation
Log (Sort by Freq.) in the property settings of the Multifunction Object.
To Next Page
Loading...
