Omron NX-SID Series User Manual

2 Enter the variable name in the Name Column of the output table or input table.
The variable that you entered is registered in the exposed variable table and in the global vari-
able table.
Setting the Expose Column for Global Variables
1 Register global variables with standard data types.
Refer to 6-5-3 Registering Variables on page 6 - 36
for details on registering variables.
2 Select the Expose Column for global variables, and then select Input or Output.
The selected variable is registered in the exposed variable input table or output table.
Copying Global Variables and Pasting Them on the Exposed Varia-
bles Tab Page
Use the following procedure to select variables on the global variable table and set them as exposed
variables.
You can select more than one global variable.
5 System Configuration and Setup
5 - 32
NX-series Safety Control Unit User's Manual (Z930)

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English