Omron NX-SID Series User Manual

7 The Simple Automatic Test Result Window is displayed when the test is completed. If the re-
sults show that the test has failed, correct the safety program or check the test settings.
Precautions for Correct Use
The Simple Automatic Test is provided as a simple means to check the output signal results for
the input signals. It may not be able to determine correct test results for complicated conditions
or special cases. If necessary, check the program logic manually
.
Additional Information
The actual test operations that are performed for the Simple Automatic Test are given in
A-15 Execution Scenarios for the Simple Automatic Test on page
A - 102.
6 Programming
6 - 89
NX-series Safety Control Unit User's Manual (Z930)
6-8 Offline Debugging
6
6-8-6 Simple Automatic Test

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English