Omron NX-SID Series User Manual

2 Check the areas to clear and then click the OK Button.
• T
o clear the event logs, select the Clear the event logs check box.
After memory is cleared, the Memory All Cleared Dialog Box is displayed.
7 Checking Operation and Actual Operation
7 - 71
NX-series Safety Control Unit User's Manual (Z930)
7-14 Restarting and Clearing All Memory
7
7-14-2 Clear All Memory Operation

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English