Omron NX-SID Series User Manual

Manual name Cat. No. Model numbers Application Description
NJ/NX-series
CPU Unit
Built-in EtherNet/IP
™
Port
User
’s Manual
W506
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherNet/IP port on
an NJ/NX-series
CPU Unit.
Information on the built-in EtherNet/IP port
is provided.
Information is provided on the basic setup,
tag data links, and other features.
NJ/NX-series CPU Unit
Software User
’
s Manual
W501
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit.
Mainly software infor-
mation is provided.
The following information is provided on a
Controller built with an NJ/NX-series CPU
Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
NJ/NX-series Instructions
Reference Manual
W502
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning detailed
specifications on the
basic instructions of
an NJ/NX-series
CPU Unit.
The instructions in the instruction set (IEC
61
131-3 specifications) are described.
AC Servomotors/Servo
Drives
G5 Series with
Built-in EtherCAT
®
Communi-
cations User's Manual
I576
R88M-K£
R88D-KN£-ECT
Learning how to use
the AC Servomotors/
Servo Drives with
built-in EtherCAT
Communications.
Describes the hardware, setup methods
and functions of the AC Servomotors/
Servo Drives with built-in EtherCAT Com-
munications.
The linear motor type model and the model
dedicated for position controls are availa-
ble in G5-series.
I577
R88L-EC-£
R88D-KN£-ECT-L
Multi-function Compact Inver-
ter
MX2-series V1
User
’
s Manual
I585
3G3MX2-A££££-
V1
Learning how to use
the MX2-series Multi-
function Compact In-
verter.
Describes the hardware, setup methods,
and functions of the MX2-series Multi-func-
tion Compact Inverter.
AC Servomotors/Servo
Drives
1S-series with
Built-in EtherCAT
®
Communi-
cations User's Manual
I586
R88M-1£
R88D-1SN£
-ECT
Learning how to use
the Servomotors/
Servo Drives with
built-in EtherCAT
Communications.
Describes the hardware, setup methods
and functions of the Servomotors/Servo
Drives with built-in EtherCAT Communica-
tions.
Related Manuals
38
NX-series Safety Control Unit User's Manual (Z930)

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English