Related Manuals
26
NJ/NX-series CPU Unit Motion Control User’s Manual (W507)
NJ/NX-series Instruc-
tions Reference Manual
W502 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning detailed specifica-
tions on the basic instruc-
tions of an NJ/NX-series
CPU Unit.
The instructions in the instruction set (IEC 61131-3
specifications) are described.
NJ/NX-series CPU Unit
Motion Control User’s
Manual
W507 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning about motion con-
trol settings and program-
ming concepts.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
NJ/NX-series Motion
Control Instructions Ref-
erence Manual
W508 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning about the specifi-
cations of the motion control
instructions that are pro-
vided by OMRON.
The motion control instructions are described.
NJ/NX-series CPU Unit
Built-in EtherCAT® Port
User’s Manual
W505 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Using the built-in EtherCAT
port on an NJ/NX-series
CPU Unit.
Information on the built-in EtherCAT port is pro-
vided. This manual provides an introduction and
provides information on the configuration, features,
and setup.
NJ/NX-series CPU Unit
Built-in EtherNet/IP
TM
Port User’s Manual
W506 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Using the built-in Ether-
Net/IP port on an NJ/NX-
series CPU Unit.
Information on the built-in EtherNet/IP port is pro-
vided. Information is provided on the basic setup,
tag data links, and other features.
NJ/NX-series CPU Unit
OPC UA User’s Manual
W588 NX102-
NJ501-100
Using OPC UA. An introduction to the OPC UA is provided.
NX-series
CPU Unit FINS Function
User’s Manual
W596 NX701-20
NX102-
Using the FINS function on
the NX-series CPU Unit.
An introduction to the FINS function on the NX-
series CPU Unit is provided.
NJ/NX-series Database
Connection CPU Units
User’s Manual
W527 NX701-20
NX102-20
NJ501-20
NJ101-20
Using the database connec-
tion service with NJ/NX-
series Controllers
Describes the database connection service.
NJ-series SECS/GEM
CPU Unit User’s Manual
W528 NJ501-1340 Using the GEM service with
NJ-series Controllers.
Describes the GEM service.
NJ-series NJ Robotics
CPU Unit User’s Manual
W539 NJ501-4 Controlling robots with NJ-
series CPU Units.
Describes the functionality to control robots.
NJ/NY-series NC Inte-
grated Controller User’s
Manual
O030 NJ501-5300
NY532-5400
Performing numerical con-
trol with NJ/NY-series Con-
trollers.
Describes the functionality to perform the numeri-
cal control.
NJ/NY-series
G code Instructions Ref-
erence Manual
O031 NJ501-5300
NY532-5400
Learning about the specifi-
cations of the G code/M
code instructions.
The G code/M code instructions are described.
NJ/NX-series Trouble-
shooting Manual
W503 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
N
J
101-
Learning about the errors
that may be detected in an
NJ/NX-series Controller.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and infor-
mation on individual errors are described.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC-
SE2
Learning about the operat-
ing procedures and func-
tions of the Sysmac Studio.
Describes the operating procedures of the Sysmac
Studio.
CNC Operator
Operation Manual
O032 SYSMAC
-RTNC0D
Learning an introduction of
the CNC Operator and how
to use it.
An introduction of the CNC Operator, installation
procedures, basic operations, connection opera-
tions, and operating procedures for main functions
are described.
Manual name Cat. No. Model numbers Application Description
To Next Page
Loading...
