Omron NX701-1

25
Related Manuals
NJ/NX-series CPU Unit Motion Control User’s Manual (W507)
Related Manuals
The following are the manuals related to this manual. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series CPU Unit
Hardware User’s Manual
W535 NX701- Learning the basic specifi-
cations of the NX701 CPU
Units, including introductory
information, designing,
installation, and mainte-
nance. Mainly hardware
information is provided.
An introduction to the entire NX701 system is pro-
vided along with the following information on the
CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series NX102 CPU
Unit Hardware User’s
Manual
W593 NX102- Learning the basic specifi-
cations of the NX102 CPU
Units, including introductory
information, designing,
installation, and mainte-
nance.
Mainly hardware informa-
tion is provided.
An introduction to the entire NX102 system is pro-
vided along with the following information on the
CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series NX1P2 CPU
Unit Hardware User's
Manual
W578 NX1P2- Learning the basic specifi-
cations of the NX1P2 CPU
Units, including introductory
information, designing,
installation, and mainte-
nance.
Mainly hardware informa-
tion is provided.
An introduction to the entire NX1P2 system is pro-
vided along with the following information on the
CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ-series CPU Unit
Hardware User’s Manual
W500 NJ501-
NJ301-
NJ101-
Learning the basic specifi-
cations of the NJ-series
CPU Units, including intro-
ductory information, design-
ing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
An introduction to the entire NJ-series system is
provided along with the following information on
the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User’s Manual
W501 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning how to program
and set up an NJ/NX-series
CPU Unit. Mainly software
information is provided.
The following information is provided on a Control-
ler built with an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language
specifications
NX-series NX1P2 CPU
Unit Built-in I/O and
Option Board User's
Manual
W579 NX1P2- Learning about the details
of functions only for an NX-
series NX1P2 CPU Unit and
an introduction of functions
for an NJ/NX-series CPU
Unit.
Of the functions for an NX1P2 CPU Unit, the fol-
lowing information is provided.
• Built-in I/O
• Serial Communications Option Boards
• Analog I/O Option Boards
An introduction of following functions for an NJ/NX-
series CPU Unit is also provided.
• Motion control functions
• EtherNet/IP communications functions
• EtherCAT communications functions