Omron ZX-E - Page 93

91
ZX-E
Operation Manual
Section 5 Changing Display Scales
Section 5
DETAILED SETTINGS
The settings listed below return to the default settings when scaling is set.
Make the settings for these items after scaling settings have been completed.
Self-trigger level, p. 83
Output Settings (Monitor Focus), p. 103
Using the Zero Reset Function, p. 127
Finding Thicknesses, p. 118
To correct display values to match actual dis-
tances
Offset the display value and change the dis-
play value range.
Two-point scaling
p. 95
Purpose Settings Method
Sensor Head
Actual distance: 1.0 mm
Value to display: 0.8 mm
Sensing
object
Actual distance: 0.2 mm
Value to display: 0.3 mm
Sensing
object
Slide gauge
Display value (mm)
Actual measured
value (mm)
Z166-E1-02A.book Page 91 Friday, June 3, 2005 4:18 PM