Index-2
front rail installation, 3-6
installation, 3-10
cable connection, 3-25
expansion module
clip nut installation, 3-17
installation, 3-20
magazine removal, 3-18
rear rail installation, 3-22
front rail installation, 3-6
gather rail parts
base module, 3-3
expansion module, 3-15
hook and loop strap, 3-24
label a module, 3-23
library floor removal, 3-16
robot lock release, 3-28
unpacking, 2-3
IPv4 address configuration, 4-5
IPv6 address configuration, 4-6
K
keyboard screens, 1-5
L
label installation, module, 3-23
library
control interface, 1-1
floor removal, 3-16
initialization
apply changes, 4-12
change default password, 4-4
drive element addressing mode, 4-9
library reserved slots, 4-10
network configuration, 4-4
set date, 4-8
set date and time screen, 4-7
set time, 4-9
start and log in, 4-1
volume label format, 4-10
power, 1-7
power down, 3-15
self test, 5-1
time zone, setting of, 4-7
lock, robot, 3-28
M
magazine
cartridge, 1-2
removal
base module, 3-11
expansion module, 3-18
using tool, 3-11
module, base
installation, 3-10
tab locations, 3-10
module, expansion
hook and loop strap, 3-24
installation, 3-20
module, label installation, 3-23
mounting rail, base module, 3-4
N
network port 1, configuration of, 4-4
network settings verification, 4-13
P
password
admin default, 4-2
change default, 4-3
power down the library, 3-15
power, library, 1-7
product staging, 2-3
R
rack
preparation, 2-1
service clearances, 2-2
spacing, vertical rail, 2-2
rail
back, overview, 3-4
front, overview, 3-6
installation
back rail, 3-5
expansion module, 3-22
front rail, 3-6
mounting description, 3-4
parts
base module, 3-3
expansion module, 3-15
reserved slot configuration, 4-10
robot lock, release of, 3-28
S
self test, 5-1
service clearance, 2-2
settings
accessibility, 1-4
network, 4-13
shipping robot lock, 3-28
specifications, 1-7
staging, product, 2-3
T
tape drive
mixture of types, 6-2
power, 1-7
test, self, 5-1
time zone, library setting, 4-7
U
unpacking instructions, 2-3
To Next Page
Loading...
