Installation Overview
Product Overview 1-7
Specifications
Physical:
■ Depth: 925 mm (36.4 inches) including 57.2 mm (2.25 inches) of tape drive
extension
■ Height:
– Base module: 3U (133.4 mm, 5.25 inches)
– Expansion module: 2U (88.9 mm, 3.5 inches)
■ Width: 480 mm (18.9 inches) standard 19 inch rack system
■ Weight:
– Base module (Module 1): 27.2 kg (60 pounds) including left and right
magazines, robot, two tape drives, and two power supplies
– Expansion module: 14.1 kg (31 pounds) including left and right magazines,
two tape drives, and two power supplies
Library Power:
■ Base module with one power supply: 35 W idle or 38 W steady state maximum
■ Drive: 9 W idle or 29.5 W steady state maximum
■ Expansion module (no power supply or tape drive): 1 W idle and steady state
■ Second power supply for base module or an expansion module: 6 W idle and
steady state maximum
For volt-amp (VA) measurements, add 2 percent to the Watt value.
For Btu/hr, multiply the total wattage number by 3.414.
Refer to the power calculator at:
http://www.oracle.com/us/products/servers-storage/sun-power-calculator
s/calc/sl150-power-calculator-1954625.html
A minimum SL150 library configuration has a total idle power of 44 W (150
Btu/hr) and a steady state maximum of 67.5 W (230 Btu/hr).
A library configured with ten modules, 20 tape drives, and 20 power supplies has
a total idle power of 338 W (1154 Btu/hr) and a steady state maximum of 751 W
(2564 Btu/hr).
Rack space requirements:
■ Base module (Module 1): 3U (133.4 mm, 5.25 inches)
■ Expansion module: 2U (88.9 mm, 3.5 inches)
Installation Overview
The initial installation of the SL150 library involves the following:
■ Planning and preparation (see Chapter 2)
■ Installation of the hardware (see Chapter 3)
■ Initialization of the library (see Chapter 4)
■ Checkout of the library and host connection (see Chapter 5)
To Next Page
Loading...
Need help?
General