Verify Network Settings
Library Initialization 4-13
Figure 4–13 Home Screen
Illustration Legend:
1 - Library Health
The top portion of the Home screen provides information on the library Health and
the state of the library (Library is Online or Library is Offline).
If Operational does not appear as the Health state, perform the troubleshooting
procedures listed in the StorageTek SL150 Modular Tape Library User's Guide before
proceeding.
Verify Network Settings
To verify the network settings:
1. Tap the Settings button on the Home screen.
The settings screen appears (see Figure 4–14) with the library tab open.
2. Tap the Network Port 1 tab.
3. Verify the settings are correct.
The screen shows the host name, MAC address, IPv4 address, IPv4 netmask, and
IPv4 gateway. If you defined IPv6, the screen would include those additional
entries.
To Next Page
Loading...
Need help?
General