EasyManua.ls Logo

Oracle storagetek sl150 - The StorageTek SL150 Modular Tape Library; Understanding Basic SL150 Concepts; Automatic Operation; Roles and Role-Based Access Control (RBAC)

Oracle storagetek sl150
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Product Overview 1-1
1
Product Overview
Oracle's StorageTek SL150 Modular Tape Library is a rack-mounted, modular
automated tape library (see Figure 1–1). Each module stores up to 30 Linear Tape
Open (LTO) Ultrium cartridges in two removable 15-cartridge magazines. A module
has a maximum of two half-height tape drives. The following tape drives are
supported:
HP LTO-5 or LTO-6 tape drives with the Serial Attached SCSI (SAS) or short
wavelength Fibre Channel (FC) interface
IBM LTO-6 or LTO-7 tape drives with the SAS or short wavelength FC interface
A bridged drive FC or SAS control path
The robot control is a SCSI Medium Changer device on LUN 1 of the bridged drive.
Figure 1–1 StorageTek SL150 Base Module and Expansion Modules
Illustration Legend:
1 - Base Module (Identified as Module 1)
2 - Expansion Module
3 - Left Cartridge Magazine
4 - Right Cartridge Magazine
5 - Front Control Panel
6 - Mailslot
Note: Library firmware release 2.60 or later supports the LTO-7 tape
drive.

Table of Contents

Other manuals for Oracle storagetek sl150

Related product manuals