Name: Oracle storagetek sl150
Brand: Oracle
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Robot Locking for Reshipment C-3

1 - Opened Shipping Clip

2 - Instruction Tag

Figure C–4 Final Clip Position

Task 4 Finishing Touches

1. Route the string and instruction tag between the mailslot and right side of the

front control panel and set it on top of the base module (see Figure C–5).

2. Replace the right magazine in the base module and verify the magazine is securely

latched.

Figure C–5 Tag Position

Default Chapter3
- Table of Contents3
Preface9
- Documentation Accessibility9
1 Product Overview11
- Storagetek SL150 Base Module and Expansion Modules11
- Configuration Overview12
  - Rear View Base Module and Expansion Module12
- Library Indicators13
- Human Interfaces13
- Specifications17
- Installation Overview17
2 Planning and Preparation19
- Rack Preparation19
  - Rear View of Sun Rack II (PDU on Right Side)19
- Tape Device Driver20
- Environmental Information20
  - Positive Pressurization and Ventilation - Hot Aisle Containment System (HACS)20
- Stage the SL150 Library21
- Unpack and Acclimate the SL150 Library21
3 Hardware Installation23
- Overview23
  - Installation Overview23
- Base Module Installation24
  - Rear View of the Base Module (Identified as Module 1)24
  - Gather the Rail Parts25
- Base Module Mounting Rail26
- Mount the Base Module32
- Expansion Module Installation35
Final Hardware Actions47
- Perform Basic Cabling47
- Initial Cabling49
- Unlock the Robot50
- Apply Power50
4 Library Initialization51
Initialization Overview51
Begin Library Initialization51
- Library Initialization Overview51
Log in as the Default Administrator52
- Default Administrator Login52
Step 1 of 6 (Change the Default Administrator Password)53
- Change the Default Password53
- Change the Default Password54
Step 2 of 6 (Configure the Network Port 1)54
- Enter the Host Name55
- Configure Network Port 1 with an Ipv4 Address55
- Network Port 1 Static Ipv4 Address55
- Configure the Network Port 1 with an Ipv6 Address56
- Configure Network Port 1 with a Static Ipv6 Address56
- Network Port 1 Ipv6 Options56
Step 3 of 6 (Set the Library Date and Time)57
- Set the Library Time Zone57
- Ipv6 Static Address Fields57
- Configure the Date and Time58
- Set the Date Manually58
- Library Time Zone and Closest City or Region58
- Library Date and Time58
- Set the Time Manually59
Step 4 of 6 (Set the Drive Element Addressing Mode)59
- Set the Drive Element Addressing Mode59
- Drive Element Addressing Modes59
Step 5 of 6 (Configure the Mailslot, Reserved Slots and Volume Label Format)60
- Configure the Mailslot60
- Set the System Reserved Slots60
- Set the Library Reserved Slots and Volume Label Format60
- Volume Label Format Overview61
- Set the Volume Label Format61
Step 6 of 6 (Review and Apply Initialization Settings)62
Apply Changes62
- Review and Apply Changes62
Verify Network Settings63
- Home Screen63
Final Configuration64
- Settings Screen Network Port 1 Tab64
- SL150 Remote Interface Log in Screen65
- Reset the Library with Manufacturing Default Values66
5 Checkout and Host Connection67
- Self-Test Overview67
- Set the Library Offline67
- Run the Self-Test68
- Host Connection71
- Automated Cartridge System Library Software71
6 Adding Power Supplies and Tape Drives73
- Power Supply73
- Tape Drive Tray74
7 Relocation77
B Controlling Contaminants81
- Environmental Contaminants81
- Required Air Quality Levels81
- Contaminant Properties and Sources82
- Contaminant Effects84
- Room Conditions84
- Exposure Points86
- Filtration86
- Positive Pressurization and Ventilation87
- Cleaning Procedures and Equipment88

Oracle storagetek sl150 Installation Manual

Table of Contents

Other manuals for Oracle storagetek sl150

Questions and Answers:

Oracle storagetek sl150 Specifications

Related product manuals

Brand	Oracle
Model	storagetek sl150
Category	Storage
Language	English