4
Library Initialization 4-1
4
Library Initialization
Basic library initialization is performed from the touch screen of the SL150 library
front control panel (see Figure 4–1). No Accessibility settings exist for the touch screen
panel, so a person with normal vision and manual dexterity should perform
initialization of the library.
Initialization Overview
Library initialization consists of the following tasks:
1. Change the default administrator password (the default user ID is admin).
2. Configure the library network port.
3. Set the library date and time.
4. Set the drive element addressing mode.
5. Configure the Mailslot, reserved slots, and volume label format.
6. Review and apply the initialization settings.
Begin Library Initialization
Tap the Start button on the initialization screen (see Figure 4–1) to begin.
Figure 4–1 Library Initialization Overview
Note: The Initialization Wizard in code versions before 2.0 did not
include tasks four and five in the previous list.
To Next Page
Loading...
