Name: Oracle storagetek sl150
Brand: Oracle
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installation Overview

1-8 StorageTek SL150 Modular Tape Library Installation Manual

Post-installation, the library can be upgraded with more expansion modules, tape

drives and power supplies. Refer to:

■ "Expansion Module Installation"

■ Chapter 6, "Adding Power Supplies and Tape Drives"

Default Chapter3
- Table of Contents3
Preface9
- Documentation Accessibility9
1 Product Overview11
- Storagetek SL150 Base Module and Expansion Modules11
- Configuration Overview12
  - Rear View Base Module and Expansion Module12
- Library Indicators13
- Human Interfaces13
- Specifications17
- Installation Overview17
2 Planning and Preparation19
- Rack Preparation19
  - Rear View of Sun Rack II (PDU on Right Side)19
- Tape Device Driver20
- Environmental Information20
  - Positive Pressurization and Ventilation - Hot Aisle Containment System (HACS)20
- Stage the SL150 Library21
- Unpack and Acclimate the SL150 Library21
3 Hardware Installation23
- Overview23
  - Installation Overview23
- Base Module Installation24
  - Rear View of the Base Module (Identified as Module 1)24
  - Gather the Rail Parts25
- Base Module Mounting Rail26
- Mount the Base Module32
- Expansion Module Installation35
Final Hardware Actions47
- Perform Basic Cabling47
- Initial Cabling49
- Unlock the Robot50
- Apply Power50
4 Library Initialization51
Initialization Overview51
Begin Library Initialization51
- Library Initialization Overview51
Log in as the Default Administrator52
- Default Administrator Login52
Step 1 of 6 (Change the Default Administrator Password)53
- Change the Default Password53
- Change the Default Password54
Step 2 of 6 (Configure the Network Port 1)54
- Enter the Host Name55
- Configure Network Port 1 with an Ipv4 Address55
- Network Port 1 Static Ipv4 Address55
- Configure the Network Port 1 with an Ipv6 Address56
- Configure Network Port 1 with a Static Ipv6 Address56
- Network Port 1 Ipv6 Options56
Step 3 of 6 (Set the Library Date and Time)57
- Set the Library Time Zone57
- Ipv6 Static Address Fields57
- Configure the Date and Time58
- Set the Date Manually58
- Library Time Zone and Closest City or Region58
- Library Date and Time58
- Set the Time Manually59
Step 4 of 6 (Set the Drive Element Addressing Mode)59
- Set the Drive Element Addressing Mode59
- Drive Element Addressing Modes59
Step 5 of 6 (Configure the Mailslot, Reserved Slots and Volume Label Format)60
- Configure the Mailslot60
- Set the System Reserved Slots60
- Set the Library Reserved Slots and Volume Label Format60
- Volume Label Format Overview61
- Set the Volume Label Format61
Step 6 of 6 (Review and Apply Initialization Settings)62
Apply Changes62
- Review and Apply Changes62
Verify Network Settings63
- Home Screen63
Final Configuration64
- Settings Screen Network Port 1 Tab64
- SL150 Remote Interface Log in Screen65
- Reset the Library with Manufacturing Default Values66
5 Checkout and Host Connection67
- Self-Test Overview67
- Set the Library Offline67
- Run the Self-Test68
- Host Connection71
- Automated Cartridge System Library Software71
6 Adding Power Supplies and Tape Drives73
- Power Supply73
- Tape Drive Tray74
7 Relocation77
B Controlling Contaminants81
- Environmental Contaminants81
- Required Air Quality Levels81
- Contaminant Properties and Sources82
- Contaminant Effects84
- Room Conditions84
- Exposure Points86
- Filtration86
- Positive Pressurization and Ventilation87
- Cleaning Procedures and Equipment88

Oracle storagetek sl150 Installation Manual

Table of Contents

Other manuals for Oracle storagetek sl150

Questions and Answers:

Oracle storagetek sl150 Specifications

Related product manuals

Brand	Oracle
Model	storagetek sl150
Category	Storage
Language	English