range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 116 www.xunlong.tv
4) Then insert the other end of the cable into the CIS camera interface of the
development board. Start the Android system after connecting the camera (do not insert
the camera after power-on)
5) Android 4.4 system test gc2035 camera requires the following Android image
6) After the Android system is started, open the camera APP and you can see the output
of the gc2035 camera. The location of the camera APP is shown in the figure below
To Next Page
Loading...
