range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 125 www.xunlong.tv
b. Then log in to the development board and uninstall the installed deb package of
u-boot
root@orangepi:~# apt remove -y linux-u-boot-orangepipcplus-current
c. Install the new u-boot deb package just uploaded
root@orangepi:~# dpkg -i linux-u-boot-current-orangepipcplus_2.1.0_armhf.deb
d. Then run the nand-sata-install script
root@orangepi:~# nand-sata-install
e. Then choose 5 Install/Update the bootloader on SD/eMMC
f. After pressing the enter key, a Warring will pop up first
g. Press Enter again to start updating u-boot, and the following information will be
displayed after the update is complete
To Next Page
Loading...
