range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 134 www.xunlong.tv
7) After selecting the type of image, rootfs will be compiled, and the following
information will be prompted during compilation
a. Type of rootfs
[ o.k. ] local not found [ Creating new rootfs cache for bionic ]
b. The storage path of the compiled rootfs compressed package
[ o.k. ] Target directory [ external/cache/rootfs ]
a. The name of the rootfs compressed package generated by the compilation
[ o.k. ] File name [ bionic-cli-armhf.153618961f14c28107ca023429aa0eb9.tar.lz4 ]
b. Compilation time
[ o.k. ] Runtime [ 13 min ]
c.
d. Repeat the command to compile rootfs, use the following command without
selecting through the graphical interface, you can start compiling rootfs directly
[ o.k. ] Repeat Build Options [ sudo ./build.sh BOARD=orangepipcplus
BRANCH=current BUILD_OPT=rootfs RELEASE=bionic
BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_CONFIGURE=yes ]
8) View the compiled rootfs compressed package
a. bionic-cli-armhf.153618961f14c28107ca023429aa0eb9.tar.lz4 is a compressed
package of rootfs, the meaning of each field of the name is
a) Bionic represents the type of linux distribution of rootfs
b) Cli indicates that rootfs is the server version type, if it is dekstop, it indicates
the desktop version type
c) Armhf indicates the architecture type of rootfs
d) 153618961f14c28107ca023429aa0eb9 is the MD5 hash value generated by
the package names of all software packages installed by rootfs. As long as
To Next Page
Loading...
