range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 41 www.xunlong.tv
tmpfs 101M 2.1M 99M 3% /run
/dev/mmcblk0p1 2.0G 1.6G 335M 84% /
tmpfs 501M 140K 501M 1% /dev/shm
3) After restarting, log in to the system through ssh or serial port to see
a. The warning that needs to restart to complete the expansion has disappeared
b. Use the df -h command to check the size of the rootfs. If the automatic
expansion is running correctly, you can see that the size of the rootfs is basically
the same as the actual capacity of the TF card
root@orangepi:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 430M 0 430M 0% /dev
tmpfs 100M 5.6M 95M 6% /run
/dev/mmcblk0p1 15G 915M 14G 7% /
tmpfs 500M 0 500M 0% /dev/shm
4) It should be noted that the linux3.4 system has only one partition in ext4 format, and
does not use a separate BOOT partition to store files such as kernel images, so there is no
problem of BOOT partition expansion
5) In addition, if you do not need to automatically expand rootfs, you can use the
following method to prohibit
a. First burn the linux image to the TF card
b. Then insert the TF card into the Ubuntu PC (Windows does not work), the
To Next Page
Loading...
