12.4 HYDRAULIC SYSTEM
Chamber drive: 280/340 bar (SW/relief valve)
Sub-conveyer, feed hopper and film system: 180 bar
Elevator and chamber door: 170 bar
Wrapper 150 bar
12.5 WHEELS AND TYRES
Tyre dimension: 385/65 R 22,5
Rim dimension: 11,75 x 22,5, 10-bolt
Inflation pressure: 8,0 bar / 800 kPa / 116 psi (lb/in²) Wheel nuts torque: 8,0 bar / 800 kPa / 116 psi (lb/in²)
Wheel nuts torque: 450 Nm
12.6 DIMENSIONS AND WEIGHT
12.6.1 Measurements
Net weight: 7120 kg
Allowed total weight: 12500 kg
Allowed vertical load on drawbar: 2500 kg
Height, transport mode: 3390 mm
Height, operating mode: 3860 mm
Length, transport mode: 7860 mm
Length, operating mode: 9170 mm
Width, transport mode: 2180 mm
Width, operating mode: 2860 mm
Chamber size: Width 850 mm x Diameter 850 mm
Bale volume 0,48 m³
Feed hopper volume: 3 m³ (F10)
12.6.2 Power requirements
100 hp / 73 kW (diesel engine)
90 hp / 75 kW (electric motor)
12 SPECIFICATIONS 111
To Next Page
