8.3 ELECTRIC PUMP AND MAIN DISTRIBUTOR
8.4 TROUBLESHOOTING FOR BEKA MAX
Problems Cause Remedy
Pump does not
work
Fuse defective
Problem with the power supply
Problem with pump motor
Replace fuse
Replace electrical cable
Replace pump motor
NOTE: Correct motor mounting
Pump is working
but does not supply
grease
Air pocket in pump
Level in reservoir is too low
Pump element not building up pressure (no
air pocket)
Bleed the pump
Refill the reservoir
Replace the pump element
No grease collar at
all points of lub-
Pump does not work
Clogging somewhere in the system
Refer to pump not working above.
See if grease is present on pressure relief
8 LUBRICATION 80
To Next Page
Loading...