2.6 Break-in period 19
3 Settings and hydraulic adjustments 20
3.1 Main parts 21
3.1.1 Principle of operation 21
3.2 Hydraulics 21
3.2.1 Guidelines for hydraulic adjustments 21
3.2.2 Tank valves 22
3.3 Feed hopper 22
3.3.1 Control panels 22
3.3.2 Settings 22
3.4 Elevator and sub conveyor 23
3.4.1 Settings 23
3.5 Chamber 23
3.5.1 Opening speed settings 23
3.5.2 Chamber pressure settings 23
3.6 Plastic tying unit 23
3.6.1 Principle of operation 23
3.6.2 Brake and feed speed 24
3.6.3 Settings 25
3.6.4 Remote control 25
3.7 Wrapping table 26
3.7.1 Principle of operation 26
3.7.2 Wrapping settings 26
3.7.3 Film cutter settings 27
3.7.4 Wrapping table tilt speed 27
3.7.5 Wrapping table ultrasonic sensor 28
3.7.6 Microsonic sensor (S1) 28
3.8 Drawbar 28
3.8.1 Telescopic drawbar 28
To Next Page
Loading...
